Instalare de solar stradal lămpi

1. Fix the components of each part: fix the solar panel to the solar panel bracket, fix the lamp cap to the arm, then fix the bracket and arm to the main pole, and thread the connecting wire to the control box (battery box).
Înainte ridicare lampă stâlp% 2c primul verificare dacă elementele de fixare la fiecare parte sunt firmă% 2c dacă lampa capacul este instalat corect , și dacă lumina sursa funcționează normal. Apoi% 2c verificare dacă simplu depanare sistem funcționează normal% 3b Slăbiți solar panou conexiune fir on controler 2c și lumina sursa lucrări.
Când lifting the main lamp pole, pay attention to safety precautions; The screws must be absolutely tighted. If there is a abatere in the sunrise angle of the component, it is necessary to adjust its sunrise direction to fully face due south.
4. Pune bateria în bateria cutie și conectați conectarea conectarea firul la controlul conform la the technical requirements; Connect the battery first, then the load, and then the solar panel; During wiring operation, it is necessary to pay attention to the correct connection between each each circuit of wiring and the terminals marked on the controller. The positive and negative polarity cannot ciocnire, and cannot be reversed% 3b În caz contrar, controlor voi fi deteriorat.
5. Dacă the commissioning system works normal; Loosen the solar panel connecting wire on the controller, and the light will be on; Connect the solar panel connecting wire and turn off the light; At the same time, attention observe the changes of each indicator light on the controller; Only when everything is normal can the control box be sealed.